BATCH INFO: Charm Atomizer (Markbugs)

Le Dripper Charm by MarkBugs probably marks the start of a new series of innovative products for the Romanian magician. So let's explore this new high-end atomizer.

CHARM - MARKBUGS: ALL THE MAGIC OF THE ROMANIAN MODER

MarkBugs took into account the different feedback from these aficionados to design this Charm atomizer. Specifications ? An atomizer that can be used as a bottom feeder or not, innovative in terms of conception and design for a result… Charming! The plate is made up of two studs: a positive and a negative cut in the mass.

The mounting holes of a diameter of 2,5mm allow you to mount single or double resistance with the resistive wire you want: the small resistive wire double clapton. The pads are quite "big" and can reduce the atomization chamber to obtain an explosion of flavors.

The airflow is adjusted by simply rotating a ring. This can be manipulated even when the atomizer is screwed on your box / mod. The airflow can be single or double input depending on your installation and comes directly under your resistance for an optimization of flavors and volume of steam. In order to properly position the air-flows in relation to your editing, the moderator has set benchmarks on the base for optimal alignment. The insulators are PEEK which allows them to withstand high temperatures.

MarkBugs proposes here a dripper likely to charm the followers of Cloud Chasing thanks to its oversized studs, its double coil assembly and its important air flow. But vapers in search of flavor should also fall under its charm with a simple assembly resistance for a faithful rendering of flavors and constant.

The latter has finally designed a top cap inside which a system allows the air to be directed to the sides of the coils, like the Darang dripper or the Manta. The top cap is also equipped with a heat diffusion-dissipation system via fins. The heat dispersion mechanism is screwed onto the top cap. An air-flow adjustment ring is also present on the top cap in order to manage the air flow that arrives from the top. The drip tip is made up of two parts. The first in delrin can be used directly as a drip tip or as an 510 adapter in order to fix any drip tip on the market (it then serves as an insulator). The second part is in SS and is attached to the delrin part to have a bi-material drip-tip.