After yesterday's announcement of the atomizer Bellus V2 RDTA, we stay at Youde (UD) in order to introduce you to the new kit from the Chinese manufacturer, it is the " Balrog V2 75W Delivered with its atomizer Goal"
BALROG V2 75W: THE SECOND VERSION OF THE FAMOUS KIT FROM YOUDE!
You probably remember the box " Balrog Which had created a small event when it was released. Today, Youde is launching a second version of this box which will therefore be accompanied by the “Goal” atomizer. As with the first version, fans of the Lord of the Rings will revel in the name of this kit created by Youde (for information, Balrog is a creature of the legendary British writer J. R. R. Tolkien. It is a powerful demonic creature, a spirit of fire belonging to the Maiar race, but corrupted by evil).
On the aesthetic side, Youde has not changed much compared to the V1, designed entirely in stainless steel and zinc alloy, we are always faced with a compact and ergonomic box that has its little recognizable look. Regarding the layout, no big surprises since everything is embedded on the facade, both the switch, the screen, the variation buttons or the micro-usb port which will be used for reloading and updating the firmware.
With 75 watts of maximum power, the Balrog V2 box was not designed to play with the big boys, it will be more suited to first-time buyers or even to lambdas vapers. Operating with an 18650 battery, we will find on the Balrog V2 classic modes of use including variable power or temperature control (Ni200 / TI / SS316L). The battery is installed by a magnetic trap located behind the box.
If you opt for the complete kit, you will have with the Balrog V2 box, an atomizer bearing the name of "Goal Mini". This rather aesthetic model has a 2 ml tank (TPD Ready) and several windows to view the remaining e-liquid. With a diameter of 22 mm, the Goal Mini will fit perfectly on the Balrog V2 and on all your boxes and tubes of the same format. It comes with a resistor CBOM SS316L 0,2 Ohm (usable between 40 and 70 watts) but MOCC SS316L 0,5 Ohm resistors (usable between 30 and 50w) will be available as an option. Its filling is done by the top-cap which unscrews, the Goal Mini also has an air-flow ring placed on the top of the atomizer.
BALROG V2 75W: TECHNICAL CHARACTERISTICS
Box Balrog V2
- Finish : Stainless Steel / Zinc Alloy
- Size : 80 40 x x 24mm
- Engime : From 5 to 75 watts
- Energy : 1 18650 Accu
- Fashion : Variable Power / Temperature Control
- Voltage : 1-8.5V
- Range of resistance : From 0.12 to 3ohm (vw) / From 0.08 to 3ohm (tc)
- Temperature range : From 200 to 600 ℉
- Color : Red-white / Black / Black-white
Goal Mini atomizer :
Finish : Stainless Steel / Pyrex
Size : 22 41 mm x
Capacity : 2 ml
Air-flow : Ring on the top
Filling : By the top-cap
Resistance : MOCC SS316L 0,2 Ohm / MOCC SS316L 0,5 Ohm
Color : Silver or black
BALROG V2 75W: RATES AND AVAILABILITY
The new kit « Balrog V2 75W »Par Youde should be available soon for 70 Euros about.
