Well what a surprise! If we could have expected that. The modder Atmizoo presents his new atomizer, the Keras MTA Giga Which has the particularity of being reconstructable but also of functioning with pre-manufactured resistors. For you, a little presentation of the beast.
KERAS MTA GIGA: SOBER, POWERFUL AND FOR ALL PUBLIC!
Once again Atmizoo takes us into their universe around animals since the Greek word Keras translates as the horn of an animal. Keras also means "powerful" and it is indeed an impression of robustness that this atomizer gives us when it is first used.
The Keras atomizer is commonly referred to as MTA for: Multiple Tank Atomizer. Indeed, the Keras is above all a rebuildable single coil atomizer, but can be used with Triton, Atlantis or even Vaporesso ceramic resistors. The Keras was designed following the request of the vaping community. A versatile, simple and efficient atomizer!
True to their principle, Atmizoo offers us a minimalist design and has chosen to use high quality materials for the design of their atomizer. Here we offer you the matte finish.
Made in SS 304, the Keras has a diameter of 22mm to match perfectly with all the main mods / box mods on the market. It has a height of 54mm for this giga version, only 4mm more than a kayfun lite for reference and weighs 81g.
Easy and practical to use, the Keras can be filled from above. Its capacity is 3,8ml with the reconstructable base and 4ml with a resistance. Originally, the Keras is fitted with a PMMA tank, but a borosilicate tank (Pyrex) is also delivered for the use of more “aggressive” juice (lemon, anise, wormwood, etc.). Note that the Pyrex tank is slightly thinner in order to preserve it as much as possible in the event of a fall.
Versatile, the Keras is a rebuildable atomizer in simple single coil. Its 10,5mm plate will give you a large space to make your coil. The negative pole screws are not very large, the use of thick wires is not foreseen. The liquid inlets are 3mm wide, therefore not excluding the use of liquid with a high glycerine content. The insulators of the tray are in PEEK. You can also use Triton, Atlantis or Vaporesso coils for more simplicity, without adding parts or additional special handling.
The Keras airflow consists of 2 adjustable cyclops 5mm wide by 1,5mm high. Completely open and in use with the pre-manufactured coils, this atomizer will be very airy and in direct inhalation. With the use of the rebuildable plate, the draft will be tighter and in 2 stages, since the air inlet of the plate is 2mm.
One piece, serving as a self-adjusting connector for the pre-manufactured resistors, is supplied in gold plated in order to minimize the voltage drop during use in temperature control.Atmizoo offers us a complete offer with this Keras atomizer, since comes with a transparent acrylic drip tip, its 2 reservoirs (see above), 2 spare screws for the negative poles, a set of replacement O-rings and a one-year warranty. Each atomizer is numbered.
KERAS MTA GIGA: TECHNICAL CHARACTERISTICS
Manufacturing : Greece
Materials) : SS 316, pyrex, peek
Length : 54mm height
Weight : 81g
Diameter : 22mm
Installation : Rebuildable or Pre-fabricated Resistance
KERAS MTA GIGA: RATES AND AVAILABILITY
The atomizer " Keras MTA Giga »Par Atmizoo is now available at « Sweet & Vapes "To 129 Euros.
