Si Aspire was clearly a forerunner in the design of the “Sub-ohm” clearomizer, the Chinese brand is really struggling to stand out against its competitors. What if this time the deal was changed? It is with this in mind that we present today the latest innovation from Aspire: Cleito which was sent to us by our partner " Jefumelibre.fr" So Aspire stood out from the competition ? Does this new atomizer show good performance? ? Is it good value for money ? As always we will bring you a complete video analysis and with this article, are you ready? So let's go !
CLEITO: PRESENTATION AND PACKAGING
The " Cleito »Is presented in a long rigid plastic box, inside you will find the Cleito atomizer installed in a foam case with a pre-installed 0,2 Ohm Clapton resistor. In addition in the packaging are provided a Clapton resistor in 0,4 ohm, a spare pyrex, a protection ring silicone and 4 silicone color caps. There will be no instructions for use or warning, some assembly explanations are nevertheless offered on the back of the label in the box. In terms of technical characteristics, the Cleito is 46 mm high, 22 mm in diameter for a maximum capacity of 3,5 ml. The 510 connector of the atomizer is fixed and not modifiable.
CLEITO: A SOBER DESIGN BUT PARAMETERABLE!
As for the general design of the "Cleito" atomizer, we stay on something quite sober. A pyrex that is not covered by a frame and an air-flow ring after all classic. The new atomizer from Aspire is made of stainless steel and pyrex. The particularity that will be found on the " Cleito "Is the possibility to customize it with silicone color caps that are the most beautiful effect (Yellow, black, blue, red). Note that the Cleito atomizer exists in two finishes different (Stainless Steel or Black)
CLEITO: A FILLING SYSTEM BY THE TOP CAP
With a tank that has a reserve of 3,5ml of e-liquid, the Cleito atomizer offers very good autonomy. Aspire has taken the time to select a filling method which is proving to be simple and practical. The Cleito will therefore be filled with the top cap, just unscrew it and introduce the e-liquid. The system is clever because on the one hand the tank can be filled with any type of bottle and on the other hand we can (finally!) Fill it to the end. One important thing, it will nevertheless be necessary to close the air-flow ring well before filling the " Cleito »Because otherwise like many atomizers this one tends to leak a little. Then all you have to do is turn it over and open the air-flow ring to expel the air from the tank which puts pressure on the e-liquid.
CLEITO: AN EASY-TO-USE ATOMIZER
It will be difficult to be simpler than the Cleito in terms of ease of use. This one breaks down into 4 parts : The top-cap, the pyrex tank, the base comprising the air-flow ring and resistance. The air-flow ring is flexible and pleasant to handle, it will allow you to adjust your air flow to the nearest millimeter in order to have an aerial or tight vape. On the drip-tip side, a notch integrated into the atomizer is basically covered by a delrin tip which therefore supports high heat, if this does not suit you you will always be able to put another 510 drip-tip (even if it will not be very aesthetic given that we see the seal supposed to support the delrin tip).
CLEITO: "CARTOMISER" TYPE RESISTORS
The strong point of this Cleito atomizer probably lies in the quality of the coils offered. On these we notice a clear resemblance to the famous " cartomizers Which made the heyday of vaping. If at first glance, the rendering did not seem to be there, you should know that they require, as for cartomizers a little time to start up, once done, the rendering of flavor and the flow of steam are there. ! On this model the resistance also acts as a frame because it forms the seal between the top-cap and the base of the atomizer. As specified, it will therefore be very important to prime your resistances by putting a few drops inside and especially by letting them stand for 10-15 minutes once the tank has been filled. For the Cleito, Aspire offers two types of sub-ohm resistors:
- 0,2 Ohm Resistance : This clapton coil resistor is used over a power range between 55w and 70w (it is important to respect the minimum power value, otherwise leaks may occur.)
- 0,4 Ohm Resistance : This resistor in clapton coil is used over a power range between 40w and 60w (it is important to respect the minimum power value otherwise leaks may occur.)
After 2 weeks of intensive use we notice that these new resistors are reliable, that they hold the shock well and offer a good vaping experience. If you are looking for a dense vapor and a rendering of flavor at the rendezvous, you will not be disappointed by its resistance.
WHAT SHOULD I USE MY CLEITO BY ASPIRE ATOMIZER?
The " CleitoHas a standard diameter of 22 mm . It will install perfectly on most mechanical mods and box mods aesthetically. Obviously, to use the resistances in sub-ohm you will need hardware that supports at least resistors to 0,2 ohm. However, do not forget that using sub-ohm resistors will require suitable batteries (eg Efest Purple). If you are not familiar with this type of material or do not know it, do not use it. In all cases, we advise you to check the value of your resistors before use with your mod or your ohmmeter.
POSITIVE POINTS OF CLEITO BY ASPIRE
- Simplicity and ease of use
- Clever filling by the top-cap
- Performance at the rendezvous (good vapor density and good flavor rendering)
- Solid and quality resistors!
- Possibility to customize the design and colors
- Presence of a replacement pyrex
- A tank with a good capacity (3,5ml)
- A well thought out packaging.
THE NEGATIVE POINTS OF CLEITO BY ASPIRE
- Lack of notice (minimalist information almost shameful.)
- A bit long to prime
- Leaks during filling if the air-flow is not closed.
- Some oozes or even leaks if the atomizer is a little too far.
THE VAPOTEURS.NET EDITOR'S OPINION
In all honesty after a few minutes of testing we were already ready to give it an "average" rating and finally after a two week test this atomizer Cleito ends with a "good" mention that it is important to test the products over the long term. If the Cleito is a bit long to start, once gone it's a real pleasure to use it! A good density of vapor and above all a good rendering of flavor. An important thing to note is an atomizer which offers an essentially aerial vape and which will require equipment which goes up to at least 60 watts in order to be able to appreciate it at its fair value. We will unfortunately notice some faults including small leaks which can become annoying for the user and which deteriorate the “good” rating of this product.
Find the atomizer now Cleito by Aspire at our partner's Jefumelibre.fr For the price of 30,90 Euros.
