After having offered you the Subtank and Subtank "Nano" test, it is today the turn of the youngest to go through the mill. The " Subtank Mini By Kangertech is an intermediate model between the two other versions of the Chinese giant. This clearomiser was graciously provided by the shop " Gearbest" So is he different from his little and big brother? Have the defects of the “Subtank”, the first of the name, been corrected? Always on the same principle, you will be entitled to a complete review in video and also to the writing on this article.
KANGER'S “SUBTANK MINI”: PRESENTATION AND PACKAGING
The " Subtank mini "Is a latest generation clearomizer / atomizer supporting" sub-ohm "resistors, it has a diameter of 22 mm and offers a reservoir of 4.5 ml. Like its brothers, the "Subtank mini" is presented in a strong cardboard box and well stocked so that your atomizer and its spare parts are properly protected. As often with Kanger, a scratch-off label is present to allow you to verify the authenticity of your product. The pack " Subtank mini »Includes your clearomizer with 0,5 ohm resistor installed, 1,2 ohm resistor, Rba bell, 510 drip tip, spare pyrex, replacement seals, cotton bag, mini screwdriver, microcoils and manual French.
DESIGN: A PERFECT MIX BETWEEN SUBTANK AND SUBTANK NANO
The " Subtank mini »Is a stainless steel atomizer which has a pyrex tank. The red silicone gaskets give it a little more colorful side. The whole therefore offers an atomizer with a futuristic design, the choice of pyrex by the manufacturer allows the user to see the remaining liquid level. Thanks to its size the " Subtank mini »Is very adaptable and balanced, settling as well on a mechanical mod, as on a box mod.
SUBTANK MINI: THE PERFECT FINISHING AND COMBINATION OF 2 1
And to satisfy everyone, Kangertech decided to make an atomizer using the principles of the first "Subtank" of the name and clearly rectifying all the defects observed. The " Subtank mini Will therefore be suitable for both beginners and experts looking for an atomizer that combines two different vape options.
A) CLEAROMIZER MODE: RESISTANCE OCC
The first possibility offered by the "Subtank mini" is a "clearomizer" mode with the use of OCC resistance (kanthal and Japanese cotton). The coils in 0,5 ohm will bring you a warm / hot, tasty and rather airy vape (depending on the position of the air-flow you choose). For 1,2 ohm resistors, we will only advise their use as a last resort if you really do not have the suitable material for the sub-ohm. OCC coils have a lifespan of a few days to several weeks depending on the power used, your consumption and the e-liquid used. This configuration will be clearly adapted to all vapers regardless of their level of knowledge, it is simple and effective.
B) THE RECONSTRUCTIBLE ATOMIZER MODE: THE RBA BELL
The second possibility offered by the "Subtank mini" is to transform into "reconstructable atomizer" mode with the use of the supplied Rba bell. The first “Subtank” of the name already offered this possibility but with less reliability. The "Rba" plate is therefore composed of 2 studs (see photo), a pre-assembled 0,5 ohm coil is installed when you open the bell for the first time. The system has been improved and the two fixing screws are now surrounded by a wall which will allow you to properly clamp the legs of your resistors. The assembly is very simple and even a beginner can learn easily thanks to the pre-assembled coils and the explanatory manual. Even if Kangertech provides in the kit all the necessary material for assembly, we strongly advise you to make your own resistances and to use Fiber Freaks or Cotton Bacon instead of the cotton already supplied.
SUBTANK MINI: INNOVATION AND IMPROVEMENTS!
The Subtank mini drip-tip has been specially adapted and enlarged for the sub-ohm vape. The Subtank Mini has like its brothers an air-flow ring which includes 4 positions: fully closed which will allow you to prime your resistance, open or very open for a classic vape and fully open for an inhalation vape direct and very aerial. In terms of tightness, the "Subtank Mini" is at the top! The seals perfectly protect the atomizer and no leakage or oozing was observed during the test.
WHAT TO USE YOUR "SUBTANK MINI" CLEAROMIZER WITH
Unlike the Subtank and its impressive diameter, the "Subtank mini" has a standard diameter of 22mm. It will therefore be installed perfectly on most mechanical mods and on box mods in an aesthetic way. Obviously, if you want to use sub-ohm resistors you will need hardware that supports at least 0,5 ohm resistors. Do not forget, however, that using sub-ohm resistors will require suitable batteries (ex: Efest Purple). If you do not have hardware supporting the sub-ohm and you do not care, you can also use the subtank mini with its resistors in 1,2 ohm or make yourself your resistors.
POSITIVE POINTS OF KANGER MINI SUBTANK
- Its high quality “OCC” 0,5 ohm resistors (over a week's lifespan), with great flavor rendering and significant vapor.
- Its size and diameter of 22 mm which will adapt perfectly to most mods and boxes.
- Its ease of use that will appeal to both beginners and experts.
- Improvements made by Kanger (Anti-leakage structure, air-flow ring, ergonomic joints ...)
- Its Rba bell system completely revised by Kanger and which turns out to be simple and effective.
- Its good capacity tank (4.5ml) which is substantial and allows to have a certain autonomy. Ease of filling.
- The additional spare parts provided (Pyrex, seal ...) and which were not with the first subtank.
- A precise manual available in French.
- Everything is provided in the kit (cotton, resistance, screwdriver ...)
THE NEGATIVE POINTS OF THE KANGER MINI SUBTANK
- A little hot steam with the use of the "Rba" kit
- Possibility of "Dry-hit" if the cotton is not well dosed.
- The drip-tip could be further improved.
EDITOR'S ADVICE ON USING KANGER'S "SUBTANK MINI"
- Remember that the Subtank Mini uses Sub-ohm resistors, so you will need suitable batteries in order to vape safely (if you do not know, do not hesitate to ask!)
- We advise you to have bigger clouds to use e-liquids 100% VG
- If you are vaping at 0,5 ohm, the hit will be much more present, we advise you to lower your nicotine level so as not to have a too powerful hit.
- Remember to check the value of your resistors when you use the "Rba" kit with an Ohmeter or with your battery (if it offers this function).
- For a longer life of your resistors, remember to stay between 20 and 30 watts which will be more than enough to have a vape at the top!
THE OPINION OF THE EDITOR "VAPOTEURS.NET"
For the editorial staff, one thing is certain: The “Subtank Mini” is the best compromise among the 3 models offered by Kangertech. This corrects the faults of the first version and offers the same services (Occ resistance or Rba kit). No doubt that at this price, we have in hand what is best on the market in terms of 2 in 1 atomizer. If you opt for the "Subtank mini", there is a chance that you will accompany everywhere!
The shop " Gearbest "Offers you the" Subtank MiniFrom Kanger to 45,00 Euros. 20 Euros discount with the PROMO CODE: « SUBTANKMINI »
