REVIEW: The Complete Venti Test (Wismec)

REVIEW: The Complete Venti Test (Wismec)

Today we are going to talk again about a model which is in line with the famous "Ego One" and which, moreover, was manufactured in collaboration with Joyetech, it is the " Winds »From Wismec. American design, this kit differs from others by its unique format which is clearly dedicated to vapers living across the Atlantic. The "Venti" was sent to us by our partner " Iclope.com For us to offer you a complete review. So what can we expect from this famous " Winds«  ? Is he reliable ? The price / quality ratio is there for you ? As usual, you will have the right to an article as well as a video review to be as complete as possible. Let's go to the discovery of this product!


UPDATE : For those who encounter problems with the Venti (gurgling, dry hit) know that the use of eGo one resistors is a solution to solve the problem. Don't ask me why, I don't know! That said, it works really well with 1 ohm, 0.5 ohm resistors and even Cl-Ni and Cl-Ti. Much better than with Venti resistors, with which we actually encounter a lot of problems.


 

WISMEC-Venti-Kit-9


VENTI: PRESENTATION AND PACKAGING


The kit « Winds »Par Wismec is presented in a fairly classic black rigid cardboard box. At the back of the packaging we will find the composition of the kit as well as a small description in English. Inside, the kit is composed of the Venti 3000 Mah battery, a Venti clearomizer, 2 resistors (0,5 ohm and 1 ohm), a usb charging cable, a wall outlet and a user manual (in English only).

venti_02


VENTI: AN "EGO ONE" DESIGN IN 26650 FORMAT


The " Winds »Par Wismec stands out and really stands out with its format " 26650 "Very popular in the United States. For those who do not know, we end up with a battery and an atomizer that has a diameter of 30 mm, to say that the " Winds Is awesome! As for the finish, this one is entirely in stainless steel, there are no other colors available. The battery and the atomizer bear engravings, on the top-cap we will find the inscription " Venti - Wismec And below " Design in California Because yes, the " Winds Was imagined in the United States. In the end with the " Winds "To Wismec, we end up with high quality material that does not have to be ashamed of the high-end mods on the market.

dsc_0795


VENTI: A XXXL BATTERY OF 30 MM


Battery " Winds " with its 3000 Mah will give you a nice autonomy and a maximum power of 35 watts in full charge for an output voltage that varies between 3,3 and 4,2 Volts. On this one we find a fixed 510 plot which allows to install any type of atomizer of a diameter 30 mm or less. Obviously this one is particularly adapted to accommodate the atomizer " Winds Which is provided but it will not be impossible to install another model which is usually used to supplement the 26650 mods found throughout the United States. Battery " Winds »Accepts resistance from 0, 15 to 5 ohms, the usb recharging socket which is also intelligently placed on the body of the battery will allow you to recharge your equipment and use it according to “ passthrough"

medium-Atomiseu-venti-wismec


VENTI: A GREAT CAPACITY ATOMIZER


With such an imposing battery, we are obviously entitled to expect an atomizer up to what is offered. And on this point " Wismec »Did not do in half measure because to accompany its monster of 3000 mAh the brand has planned an atomizer with a capacity of 5,8 ml. Entirely in stainless steel, we will also have 2 large openings on the sides in order to be able to control the amount of e-liquid remaining. The atomizer " Winds »Is 30 mm in diameter which will still be problematic to adapt it to a box or a different mod (except 26650) of the adapted battery. The drip-tip installed is interchangeable, this one is very open to the outside and rather tight inside which will not quite allow an aerial vape. The atomizer has a one-piece air-flow ring, it is a little rigid (like the Ego-One) but it will allow you to modulate your air flow as you see fit.

Spray-venti-wismec


VENTI: RESISTANCE SIMILAR TO EGO ONE, A DIRECT INHALATION VAPE


If the " Winds Has its own classical resistances (1 ohm) or sub-ohm (0,5 ohm), you should know that this one works with the same resistances as the Ego One of Joyetech which is a very good point. This atomizer will offer you a good quality of vape, however you will not be able to use it in a classic way without having some concerns of " gurgle "Or" Dry-hit". The "Venti" atomizer is clearly designed for direct inhalation use in order to have the best possible sensations, we will then have a good production of vapor and a rather well respected flavor. Although this model uses Ego-One resistors, we will not find the problems of recurring leaks on the Joyetech model.

20525148152_08f718bfef


PRECAUTIONS ON THE USE OF THE "VENTI" KIT


This kit being basic adapted to manage the sub-ohm, you do not have to worry a priori from a safety point of view. The "Venti" kit from Wismec has been configured to accept resistances at 0,5 ohm, so we have the right to place our trust in it. However, take the time to read the instructions in order to make the best use of your equipment. Also remember that it will be possible to install other atomizers in 30 mm and less on your Venti battery, nevertheless remember to check the value of your resistors before use.

medium-venti-wismec-tubullaire


THE POSITIVE POINTS OF "VENTI" BY WISMEC


- A high quality finish
- Ease of use
- A unique and original model
- A large capacity battery (3000 mAh)
- An atomizer with a large reserve (5,8 ml)

- The possibility of using "Ego One" resistors

Kit-venti-wismec


THE NEGATIVE POINTS OF "VENTI" BY WISMEC


- Very classic packaging
- A drip-tip a little too tight
- The obligation to use it in direct inhalation to avoid dry-hits
- Notice almost non-existent (and in English
est)

good


THE VAPOTEURS.NET EDITOR'S OPINION


At the aesthetic level, there is not much to reproach the " Winds“, We will love or hate its imposing and massive side. In any case, it has a very good finish and a certain class that cannot be taken away from it. The fact that it was designed in collaboration with Joyetech and the possibility of using “Ego One” resistors offers real added value to this model. We will nevertheless regret its quality of vape which can leave something to be desired in classic use. Wismec's "Venti" will delight fans of American-style 26650 mods and direct inhaled vape while maintaining a certain safety and ease of use.


Find the Kit "Venti" de Wismec at the price of 64,90 Euros at our partner's « Iclope.com ".


Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author