The electronic cigarette is an extraordinary product and we all agree on this point but certain abuses have been increasing for some time and it has lasted too long. If the vaping makes it possible to put an end to tobacco, we cannot afford to do anything and everything under penalty of putting ourselves in danger. After observing these drifts, we decided to talk to you about it and push a blow of mouth ! The goal is not to make us notice but to explain to vapers and more particularly to new insiders that it is possible to make the most of the electronic cigarette without exceeding certain limits.
SUB-OHM: 0,01 OHM RESISTORS! WHAT FOR ?
It is a sad observation! We meet more and more novices who clearly announce wanting to make very low resistances without having mastered the elementary notions in the field. Do you really get more vapor or more flavor with a 0,01 ohm resistance than with a 0,5 ohm resistance? Well not necessarily! On the other hand, the danger is not the same, especially when we see the damage that can be done by batteries which degas. Vape is not a game! From the moment you decide to experiment with assemblies that require knowledge of electricity without really knowing what you are doing, you take the risk of seriously injuring yourself. It's a bit like playing Russian roulette with a loaded gun while being convinced that it's a dummy gun. "Power Vaping" can be considered as an art in its own right in vaping, but it turns out to be dangerous if it is not practiced under optimal safety conditions.
Conclusion : Above all, do not get into the sub-ohm without having the necessary knowledge! If you are just starting out, there are enough clearomizers on the market to quench your craving for abundant vapor. A resistance of 0,5 Ohm with secure material will most likely give you the sensations you are looking for and if you really want to get started in reconstructable, take the time to learn the necessary basics. Do not engage in dangerous and unnecessary montages which, moreover, would put you in danger!
POWER: ALWAYS MORE WATTS! ALWAYS MORE DANGER!
If the e-cigarette manufacturers have been in the race for some time for some time, we should not be fooled! There is absolutely no point in having equipment that goes above 70 watts. This little game which consists in knowing who has the biggest becomes really problematic when a beginner embarks on the e-cigarette with a set-up combining a 200 watt box and a sub-ohm atomizer. Once again, the danger is extremely present and even more so when the model requires the purchase of a battery not supplied.
Conclusion : No need to have a 200 watt box to get a quality vape. Most atomizers on the market cannot be used above 30-40 watts, so there is no need to put yourself in danger by trying to make improbable combinations. We advise you to opt for the purchase of a model not exceeding 70 watts which would be totally suitable for all your atomizers. Most importantly, don't choose just any battery, if you don't have the necessary knowledge, ASK PROFESSIONALS! We also advise against models with 2 or 3 batteries which require special precautions.
E-LIQUID: DOING YOURSELF DOESN'T MEAN DOING ANYTHING!
The “Do it Yourself” has become very popular for some time but the fact of making your own e-liquid does not mean doing anything, anyhow. It is important not to add unforeseen elements to your creations, such as food coloring, alcohol, etc. Also, don't forget that handling nicotine products involves risks, remember to wear gloves. , glasses and various protections.
Conclusion : Do not take risks by adding anything and everything in your e-liquids. If you are a beginner in "Do it Yourself", prefer ready-made concentrates. In order to develop more complex recipes, seek advice from specialists in the field and take the time to learn!
BOX HOMEMADE? DO NOT PLAY WITH FIRE!
Unfortunately the results are not over! We see that many people are starting to manufacture "Home made" boxes without having any knowledge of electronics. No need to have the eye of the tiger to realize that this practice is on the increase and is clearly turning into anything! Building an electronic box yourself without having technical knowledge is extremely dangerous, as poor design can lead to serious failure or even explosion.
Conclusion : Do not start designing a box if you do not have the necessary skills. If you are really passionate about it, take the time to learn and talk about it with professionals, follow up your work so as not to make mistakes
MECHANICAL MOD: IMPERATIVE TO TAKE CERTAIN PRECAUTIONS !!
Yes, it is true that the mechanical mod has had much less popularity since the arrival on the market of box mods but some beginners are still being tempted by the adventure in view of the prices charged by certain Chinese sites.
First of all, the mechanical mod is not suitable for learning about the e-cigarette because it requires many safety precautions. If you like the design, it is always possible to get started in the vape with an "Ego One" kit or a "Venti" kit which will have the same look without the danger. A mechanical mod is not regulated, so you will need to use an accumulator adapted to the resistance that will be used in order not to put yourself in danger. Possibly, brands like "Gus" offer fuses that will allow you to have a mod a little more secure but that is clearly not enough. Your mechanical mod should also have degassing holes so that your accumulator does not explode if it degassed in your mod. The use of a mechanical mod remains very technical and requires knowledge in the matter, we strongly advise against it for beginners.
Conclusion : If you want to learn about the e-cigarette, the mechanical mod will not be a good alternative. If despite everything, the design pleases you, rather get an "Ego One" kit or similar, it will suit your needs much better.
GLOBAL CONCLUSION: DO NOT PLACE THE PLOW BEFORE THE BEEF!
For the vape as for the rest, you have to learn! Do not rush into wanting power-vaping or wacky editing right away, if you are really interested, it will come with time. We understand, however, that currently it is difficult to find one's way and that sometimes we want to jump on the latest models without even questions. The most important thing to know is that an e-cigarette can be dangerous if it is not used in optimal safety conditions, which is also why many brands offer "starter kits". Which allow you to benefit from the latest developments while limiting risks to a minimum. Besides that, while you will use your initiation material, nothing prevents you from consulting our various tutorials which will allow you to acquire better knowledge and to evolve towards more advanced material.
TO CONSULT: OUR TUTORIALS FOR BEGINNERS
- Our complete lexicon of the vape: To know what we are talking about, simply!
- The battery guide: To know everything about how they work
- Safe battery: The 10 rules to respect!
- Tutorial: Easily make a coil on dripper
- Tutorial: How to make a coil?
- Tutorial: What is an e-liquid?
- Tutorial: My rebuildable 1er! Preparation.
And of course if you have any questions, don't forget that we remain at your disposal same here or on our facebook page FAQ"
